Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they don't rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home, and could even be fatal. It is essential to take the time to ensure that you're doing all you can to keep your windows in good condition.

Single-pane windows are relatively easy to replace and will usually fit into the old frames very easily. If you have double-paned windows that are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this situation you'll need source some plastic spacers to assist the new pane to fit properly into the frame of the window replacement near me.

Wearing eye protection and thick gloves is a must if you plan to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes so that any shards fall onto the fabric and not on the floor and could be trampled under.

Once the glass is removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to block water and drafts from getting into the property until a professional comes out and fix the Window Doctor. It also acts as a barrier that will prevent any intruders from getting access to your home. If the distance between the window and the door is substantial, you may want to use security screens that has an opening. This will give you the best of both.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. Over time, they can develop a number of problems such as sagging. A sagging uPVC windows can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to prevent the problem from getting worse.

To fix a sagging window you can try repositioning the hinges. To do this, you'll have to open the window so that you can access the frame. Then, remove both the top and bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, shut your window and verify the fit. If you're happy with the fit, tighten the screws until they stay in the right place.

If you are unable to move the hinges, you could need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to loosen. It is essential to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. This is often caused by screws that have been removed over time, but it can be due to the handle mechanism wears out. It's fairly simple to repair a loose uPVC handle. First, you'll need to close the window and perform an initial test to ensure that it fits. The corner joints of the sash should align with the casing joint. If it doesn't then you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into its original position.

3. Water Leaks

It is crucial to take action if you wake up every morning to find mouldy walls and wet floors. Leaks of water from windows can cause structural damage to your home and impact your ability to regulate the temperature of your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame has been damaged or not present.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on the severity of the problem the caulking used previously may require removal before a new layer can be applied. It is crucial to keep in mind that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area more difficult to clean and reduce your energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious situations, you may have to replace the window.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to note that if the leakage is coming from between the glass in your double glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or it opens in the breeze. They can be repaired by any DIYer who is skilled and are usually done within a few minutes.

Like all mechanical parts, hinges can wear out over time. It's very simple to change a window hinge however it is simpler if you have someone to help you to hold the frame.

Verify that the uPVC hinges open and close in the proper direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window a certain way or by improper installation in the factory. This issue can be fixed by sending us a photo on our website. We will be happy to give you advice.

Regularly lubricating the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is a good way to do this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. This is recommended to be done at least every year. WD40 or other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different factors. The hinges may also become unbalanced due to wear, causing a gap where the sash and frame meet. These can be easily fixed by giving them a thorough clean, however if they are beyond repair it may be necessary to have them aligned or replaced. Secondly the interlock, this is located on the hinge side of the window, can be misaligned. Again, it may be feasible to give them a thorough clean, however in certain cases, it may be necessary to get them replaced.

These seals can wear down or get damaged over time, allowing air escape. Replacing these with high-quality weatherstripping is a good way to keep draughts at bay. Replace the upvc windows with low-emissivity lenses. This will help to regulate indoor temperatures and decrease the possibility of draughts.

The final method to cut down on draughts effectively is by using a Draught-exclusion device. These are usually fabric tubes filled with a filler that can be placed over your window sill. These will keep your home warm by blocking cold air.

With a little maintenance and repairs, your upvc windows will continue to provide an excellent level of insulation and security for your home. It is crucial to recognize that windows last for a certain period of time and there may come a point where it is more cost-effective to replace them rather than fix them. If you are experiencing problems with your upvc windows, it's recommended to seek assistance from a professional as soon as you can.