UPVC Window Handle Replacement

It's simple to repair a broken window handle with the right tools. However, it is essential to know your type of handle and its spindle's length prior to purchasing a replacement.

Older uPVC window handles have a spur that protrudes and locks on a cockspur wedge striker. They can be right or left-handed and have to be matched when replacing.

What kind of lock or handle do I have?

There are many window locks and handles made from upvc, each with its particular advantages and uses. The type of handle you own will determine whether or not your locking mechanism is efficient and if it's easy to open windows. Over time, and with regular use, the upvc handles on your windows replacement could be damaged and worn out. This makes them less secure and effective. In some instances, they could even fall off completely. It is important to repair the handles on your window made of upvc as soon as you notice them falling off. This will help prevent burglaries, and keep your house secure.

It's a task that anyone can complete. With a few basic tools and the proper knowledge it's a simple procedure that should take no longer than a couple of minutes. To get started you must determine the type of lock and handle you have on your upvc window and then identify the best replacement.

Inline Espagnolette Handles

They are typically located on the side of the window. They have a flat design and feature a latch that connects to the locking mechanism of the frame of the window when it is turned. Inline upvc handles also come with spindles that run through the middle of the handle, and into the window frame to operate the latch.

Cockspur Handles

They are usually found on older uPVC windows and have distinct hook-shaped designs. Cockspur handles are fitted with a single screw that holds the handle to the frame and are not as secure as other types of window handles.

Handles that can tilt and turn

In contrast to other upvc handles the tilt and turn handles can be turned to open the window, and turned inwards to allow to let air flow in. They typically feature a 7mm spindle on the back of the handle and are available in left and right handed versions.

It is important to measure the spindle's size prior to purchasing a replacement handles made of upvc. Not all of them are the exact same size. Drop something into the middle of the hole to test the length. This is the maximum size of spindle that will fit in your windows.

What is the spindle?

uPVC window handles work in a similar way to doors. By turning the handle, you can activate a latch inside the frame. The window then opens and shut. However, in some cases, the handles may become damaged, particularly when they are used frequently or exposed to harsh weather conditions. You may have to replace the handles on your uPVC window if they are not able to operate it correctly.

There are many types of uPVC handles, including Espag, Cockspur, and Spaded handles. They are designed to fit into the uPVC frames in different ways. Each handle has a particular spindle that is used to secure the mechanism to the window. It is crucial to know the type of handle you have installed on your uPVC windows to ensure that you replace it with a suitable one.

You can check what type of uPVC handle you have by inspecting the base of your handle. A snap-in covers should be over the screw that holds the base of the handle in place. Once you remove this, you will be able observe the second screw that holds the handle base in place. After both screws have been removed then you should be able to take the handle out of the uPVC.

After removing the uPVC handle, carefully unscrew it from the locking mechanism. Be sure to note the length of the spindle, as you'll need to make sure that you purchase a replacement window glass that has the same length as your original handle and locking mechanism.

The primary issue with window handles made of uPVC is that the handle spindle gets worn out and can no longer function properly with the locking mechanism. This could be due to corrosion, damage caused by continuous use, or even an unreliable locking mechanism. If this occurs, it will be necessary to replace the window handle as well as the locking mechanism to restore the full functionality to your uPVC windows.

How do I get rid of my old handle?

Window handles are susceptible to being damaged or even broken over the course of time. It is essential to fix them as quickly as possible to ensure your security. It is simple to replace a worn or damaged handle. The job can be accomplished in under an hour without the need for any special tools.

To take off the handle, first remove the screw located at the base of the handle. After this screw is removed, the handle will be removed from the base section. A second screw is situated at the base of the handle. This too can be removed. After both screws are removed, the handle can be removed completely from the base portion of the window.

After removing the handle and align the fixing holes of the new handle with the holes already present in the window frame. There might be a small sticker or caps on the new handle, so remove these if necessary and then put the handle in its place. It is crucial to verify whether the handle functions after it has been installed. Turn the handle over and ensure that the lock mechanism is activated.

Espag handles have a spindle which protrudes from the handle and slots into the multipoint locking mechanism that is on the frame of the window. Cadenza windows have a blade with cutouts that fit into the lock mechanism. Cockspur handles are long and Window Handle Replacement hook over the frame that surrounds the window or the transom crossmember of the bar.

After you have installed the new handle, slide the spindle into the window lock and tighten it. Once the handle is firmly fixed in place and secured, replace the snap-in cover and the screw cap (if applicable). Once the handle is ready for use, simply open and close the window a few times to ensure it works properly and securely.

How do I install the new handle?

The process of changing your window handle made of uPVC isn't difficult, and the process is actually very simple. You only need a screwdriver and a bit of perseverance. First, ensure that the old handle is unlocked. Then remove any screws that are visible. You can also replace them with screw caps. After removing the handle it is necessary to take a note of the length of the spindle that extends from the back of the handle. This is crucial as it will determine what kind of handle you will need to purchase.

Espagnolette handles are the most popular kind of handle that is used on uPVC windows. They have a spindle that runs through the handle and acts as a locking mechanism inside the window frame. When the handle is turned, it releases the latch on the window and allows it to open. When used regularly and over time, espagnolette handles may be damaged.

Cadenza handles are a type of uPVC handle that is typically used with tilt and turn windows. They feature a protruding blade that is operated by a multi-point locking mechanism within the window. They are generally more secure than handles made of espagnolette because they can only be opened from the inside. They can be replaced with the same procedure as espagnolette handles, however you must make sure that the new handle has a curved blade, as opposed to one that is flat.

Once you've decided on the right handle for you, you can simply line up the new handle with the existing screw holes, and then screw it into place. Then, put the screws back on and verify that the new handle functions properly. You can perform this by moving the handle between the locked position to the unlocked one several times. It may be worth contacting an expert to determine how you can fix any problems. They can offer advice on how to solve the problem in a timely and effective way.