Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. They don't rot or rust like aluminum or timber.

It is crucial to wash and oil UPVC windows and doors regularly. This will help prevent unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home, and could even be fatal. You should take the time to ensure that your windows are in good shape.

For single pane windows it can be relatively simple to replace them, and the new window will usually fit inside the frame of the previous one easily. If you have double-paned windows which are held together by internal beading, it will be harder to remove and replace the old panes. In this situation you'll need find some plastic spacers that help the new pane to fit perfectly into the frame of the window.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards fall onto the fabric, not onto the floor and could be trampled under.

It's a great idea tape the gap once the glass has been removed. This will keep water and drafts from entering your property until a professional is able to fix the window. This will also provide a barrier to prevent any intruders from getting into your home. If the gap is particularly large, you may want to consider using the security door with an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. In time, they could be affected by a variety of issues such as sliding. A sagging window can cause problems with light, draughts and even security. It's important to take action immediately if you notice your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window that is sliding. To accomplish this, you'll need to open the window to get to the frame. Then, using an screwdriver, unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and check for an appropriate fit. If you're happy with the fit, you can tighten the screws until they stay in the right place.

If you aren't able to move the hinges, window repairs Finchley you might need to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to loose their elasticity. It is crucial to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also become loose. This is usually due to screws that have loosened over time, but it could also be caused by the handle mechanism wearing out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. First, you'll need to shut the window and then perform an experiment fitting. The corners of the sash must be aligned with the casing joint. If it does not then you can use the screwdriver to loosen the handle. Then turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and mouldy walls every time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home and also impact your ability to regulate the temperature in your home. The most common reason for leaking uPVC windows is that the sealant around the frame has been damaged or missing.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Based on the severity of the problem the old caulking may need to be removed before a fresh layer can be applied. When it is time to uPVC repair, it is important to avoid 'over-caulking'. This will make your window Repairs finchley more difficult to clean and decrease its energy efficiency.

Check that any drainage holes are free of debris inside them and that the sill pan is properly angled to allow the water to drain from the window. In more serious instances, you may need to replace the window.

Mold spots and rotten sills are other signs of water leakage. The fungus thrives in damp conditions and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is more with the seal than the frame. Again this can easily be repaired by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open, or if it opens with a breeze. Any competent DIYer can replace these in a matter of minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that have hinges and, just like any mechanical component they will wear out over time. It is an easy procedure, but it is simpler if you have someone to assist in holding the frame up.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window in a particular way or by improper installation in the factory. This issue can be fixed by sending us a photograph through our website and we will be more than happy to give you suggestions.

It is also crucial to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant on the hinges is a good method to accomplish this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. Ideally, you should do this at least once a year. WD40 and other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by different factors. Firstly the hinges, again because of wear and tear, could become misaligned. This will cause a gap to form where the sash joins the frame. This can be easily repaired by giving them good clean, but when they're beyond repair, it might be necessary to get them re-aligned or replaced. Secondly the interlock, this is located on the hinge of the window and can be misaligned. Again, it's possible to give them a good clean, but in certain cases, it may be necessary to have them replaced.

The next common reason for draughts are the window seals. These are prone to wear or damaged over time and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help regulate indoor temperatures and lessen the possibility of draughts.

The last way to reduce the amount of draughts is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler that can be put on top of your window sill. They can help keep cold air out and keep your home warm and cosy!

With a bit of regular maintenance and repair windows made of upvc will provide a great level of security and insulation for your home. It is important to remember that all windows will eventually become worn out, and it is cheaper to replace them rather than repair them. If you encounter any issues with your Upvc window repair Ewell, it's best to consult a professional as soon as you can.