How to Replace a UPVC Window Handle

Don't be worried when your upvc handle has become broken. Replacing a upvc window handle is an easy task and can be accomplished in just a few steps.

Whether you have a cranked or in-line espagnolette style window handle, all of them feature a square spindle that protrudes from the back plate and is inserted into the locking mechanism.

Identify the type and size of the handle and lock.

Over time window handles and locks could become damaged or lose their functionality. It is possible to repair this issue without replacing the entire uPVC unit. The first thing to do is determine the kind and size of your handle and lock. This will help you identify the replacement parts that you need.

You can determine the type of handle by looking at the base. There will be the screw or pin that is holding the handle to its base. If the screw is missing it could be an indication that the handle has split off from its base. If the handle has been split in the middle and no longer grips onto the spindle, this could be a sign that it is in need of replacement.

There are many different types of uPVC window handles The most well-known is the Espag handle. They are usually secured by two bolts and feature a spindle that engages the lock mechanism within the frame of the window. These handles are usually used on uPVC tilt and turn windows.

Cockspur handles are a different kind of uPVC handle. They are similar to the Espag handles, but have a lower projection from the frame. These handles are typically used on older upvc window handle replacement windows.

Additionally, there are Venetian window handles that are similar to the Espag handle, but they have an elongated base that allows them to be placed in a flush position with the frame. These handles are a good option for homeowners who are looking for a stylish handle that will blend with their uPVC frames. The handles are available in a variety of colours that can be matched to any design.

Measure the spindle

Before purchasing a new handle, it's important to understand how the original handle is attached. This will determine how it is tight or loose and if it will fit correctly into the window frame. This can be determined by identifying the handle type and measuring the spindle. The spindle is a metal shaft that connects your handle to the lock on the window frame. The spindle is available in various sizes. The current industry standard is 8mm. Older handles could have a 9mm cross-section so it's crucial to measure the old one to make sure you get the proper size replacement.

There are a variety of window handles. The most commonly used are the inline Espagnolette handles and cockspur handles. These handles operate an locking mechanism within the window with shootbolt rods that secure the window when it's closed. Depending on the type of handle, they are held in place using pins or screws.

You can find replacement handles for Glass window Replacement windows made of upvc online and in most DIY stores. They are available in a variety of finishes, and can be used for windows that are new or replacement. They can also be key-locking, or fire-escape non-locking for additional security.

To take off the handle just open the window towards the door and remove all screws that hold it in place. Be careful not to damage the screws, and keep them safe in a container for later use. Once the screws are removed, remove them carefully from the handle. Find the distance from the base of the spindle to its tip. This will provide you with the information needed to buy the right replacement. The spindle of the handle is the steel shaft connecting it to the gearbox that locks the window frame.

Remove the old handle

Changing the handle of an uPVC handle is a straightforward task that takes less than five minutes, if you have the appropriate tools. The first step is to determine the lock type and handle, which will help you find the correct replacement. After that, weighing the spindle will help ensure that the new handle is a perfect for the job. The old handle needs to be removed and replaced with the new.

Most uPVC handles are inline Espagnolette handles, which are equipped with a central spindle that slots into the window's locking mechanism. They are usually easy to remove but may require force if they become stuck. There are typically two screws that keep the handle in place, which can be removed with either pliers or a screwdriver. There may be a need to remove pins, based on the type of handle.

After the screws have been removed After that, you can take off the handle that was previously attached. When the handle is open and the top of the baseplate will be visible. This will reveal two additional screws that can be removed. There's also an unimportant silver or color sticker that must be removed if it's still in place.

With the screws that came off the handle, you are now able to put the new handle in place. Align the screw holes on the window to the holes in the handle. Once you've completed this you can replace the caps on the screws. Test the new handle. It's simple to swap the uPVC, however you have to do it right.

Fit the new handle

It's time to install your new handle if you have successfully removed the old one from the frame. Begin by finding the screws and then removing them out using your screwdriver. Once the screw covers are removed, place them in a secure place before moving on to the next step.

Then, insert the new spindle into the handle by aligning it with the existing hole and screwing it in. Be sure to align the holes of the handle with holes in the window frame and use a screw that is similar in length to those used previously, or it could result in the handle not being secure.

The uPVC Espag handle comes fitted with a spindle of 7mm square which turns the lock mechanism that is mounted on the window. This kind of handle can be found in most modern uPVC windows. uPVC Cockspur handles (also known as Cotswold handles) have an extended nose that locks over the outer frame or transom bar cross member and are often found in older uPVC windows.

It is important to lock and unlock the window a few times after the handle is installed. If everything goes according to plan, the new uPVC handle should be properly attached and running smoothly. If not, the steps above will help you diagnose any issues and fix it quickly. If you're having trouble with your uPVC handle or any other glazed home improvement issues do not hesitate to contact us at Bridgewater Glass Window Replacement for professional assistance. Our glaziers can repair or replace different window handles and frames. This makes us a great choice for double glazing.

Test the new handle

As time passes and through regular use, uPVC handles and locks can suffer from damage and wear and wear and tear. This can leave them less secure and efficient which is why it's crucial to replace them as soon as possible. It's also a good option to consider when you upgrade your windows. Changing the handle and locking mechanism will help maintain your new windows' integrity.

There are a variety of styles of uPVC window handles. Some are attached with screws or pins while others have blades which fit into the lock mechanism. Each type has its own method of replacement, so it is important to know which kind you have before you start working on it.

Espag window handles are the most popular kind, and are typically used on newer uPVC windows. These handles have spindles that extend from the handle and goes into the gearbox of the lock and, when you open the windows, it triggers the locking mechanism. They are also simple to remove. However, it is important to be careful not to damage the mechanism or the handle.

Cockspur handles are another alternative for uPVC window handles. They're held with a spur that hooks onto a wedge-shaped striker plate on the frame. When you shut or tilt the window, it activates the locking mechanism. This kind of handle may be more difficult to fix than other types, but it's still a good option for homes with a lot of windows.

Venetian handles are connected to the frame using two bolts, and they have a low projection on the frame. This is different from the Espag handle. These handles are great if your goal is to have a flush-fitting handle that blends into uPVC window handles replacement frames. These are perfect for residential and commercial properties.