Choosing uPVC Replacement Window Handles

Most customers agree that the upvc replacement window handle handles are easy-to-install and feel good. But it's important to understand that the kind of handle you choose must be right for your window.

The most important aspect is the step height that refers to the gap beneath the nose of the handle to the base or frame. Other considerations include lockable designs and mechanisms.

replacement windows prices parts

There is a variety of replacement upvc window handles available to buy. There are a variety of styles and colours to choose from, so you're bound to find something that is compatible with the windows you have. It's easy to purchase a product on impulse especially when the handle breaks. It is therefore advisable to look over a few aspects before buying an alternative. The first thing to think about is the type of upvc handle you have now and what the difference between kinds is. The table below lists the most popular handles to help you choose the one that will suit your window made of upvc.

Espag handles are the most common and are found on most modern double glazed windows. They are usually attached to the frame with two screws that screw in from both above and below.

The spindle bar on the back could be of different sizes, and will determine whether they are left-handed or right-handed. It's important to take the measurements of the handle you have to ensure that you get the right replacement.

Usually, they are fixed with two bolts similar to the Espag handle, they have a lower projection from the frame which means that the arm will not poke through your blinds. This is an ideal choice if you have blinds on your upvc windows and want to ensure that the handle blends with the blinds.

Cockspur handles resemble Espag handles, however they have a nose that closes over a wedge that rests on the frame of the window. This type handle is found on some older wooden and Upvc windows.

Tilt and turn handles are often found on casement windows. They can be operated either by turning the handle or pushing on the top of the window. This lets you open the window from inside and clean it from outside, without having to climb a ladder or walk across the garden fence. These are ideal for those with limited mobility, and can enhance security and access to the home.

Tips and tips and

There are many different kinds of uPVC window handles, and a lot of people will need to replace them at some moment. When this occurs it's best to know a few hints and tricks that will assist in making the task go as smoothly as it can.

Find out what kind of handle is in your home. Depending on what the handle is attached to and which locking mechanism it uses, it may be necessary to change the entire handle and lock. For instance, if the shoot bolts (espag) and roller cams are seizing or jammed, you will need to change them as well as the handle itself.

Thankfully, the majority of uPVC handles conform to industry standards and are very alike. This makes replacing them a relatively simple process. The first step is to remove the screws from the handles. These are usually the pozi-drive screws. Once they are removed, you can remove the handle.

It's a great idea to note how much the spindle extends from the base of the handle after you take it off it. This will help you measure the length of the spindle for an alternative handle. Simply take note of the length the square peg extends out of the bottom of handle.

This is particularly crucial for inline uPVC window handles since they are always straight and open either left or right, and will not operate in the middle. It's a good idea if you're not sure of the kind of handle you have in your home to borrow a handle and check out how it functions.

Another excellent method to figure out what handed the uPVC window handle is is to simply look at how the handle turns when operating. Handles that are hand-operated will turn clockwise or anti-clockwise. If you're not sure, ask someone to open the window using the handle and see how it functions.

Measure the spindle

It isn't easy to select the correct replacement handle for your window since not all handles have the same size. The spindle controls the locking mechanism inside the window. It is crucial to ensure that when installing a new handle it is measured to the length of the spindle accurately to ensure it fits. There are many different kinds of uPVC window handles that operate in different ways so it is essential that you know what type of handle you have as well as the type of locking system you have.

Espag handles come with a spindle that extends from the rear of the handle and goes into the lock gearbox that is within the window frame. When you turn the handle, it will turn the lock inside the gearbox to open the window. They are typically used on uPVC windows with casement. They can be locked with keys for extra security.

Cockspur handles are commonly found in older double-glazed uPVC window frames. They are characterized by a "nose", which closes over a wedge-shaped striker block. They are also easy to use and can be locked using keys. These handles can be a little more difficult to find replacements for because they aren't as well-known as the espagnolette handle.

If you own a tilt-and-turn uPVC then you'll require a new handle that has a different locking system. The handle can tilt the window and also allow it to be turned around to fully open it. You must make sure that the handle you pick has a spindle size of at least 55mm or it won't be able to reach into the frame of the window.

You can use the same method to remove and replace this type of uPVC handle, but you must be cautious when you remove the old one. It might be necessary to open the window more than normal to reach both screws that hold it to the frame. After you have installed your new uPVC handles and verified that they are in the proper position, you can tighten up the screw covers and replacement window handle test to ensure the lock is working correctly.

Fit the new handle

Once you have the correct handle replacement, it's going to be easy to screw it into place. It will require a screwdriver and an electric one may be more convenient. It is essential not to overtighten the screws before screwing them into. This can cause the handle or knob to become warped.

The other important step when fitting the new handle is to install the spindle. It is the part that is inserted into the handle and controls the locking mechanism within the window. It is essential that it is installed correctly since this will ensure the window is able to be opened and closed securely.

There are many different types of uPVC handles. There are a variety of uPVC window handles.

Espagnolette Handles - these are inline handles that can be used to tilt and turn windows to open the window.

Cranked Espagnolette Handles - these are similar to the inline handle, but have a curvaceous design that is ideal for windows in difficult-to-access locations.

Tilt and Turn Handles They are used on tilt and turn windows for operating the opening and closing mechanisms.

The majority of uPVC window frames come with these. They are often referred to as 'Bay Windows' in the UK.

It can be frustrating when your uPVC handle breaks. There is no need to change the entire uPVC windows because of a damaged window handle. There are a number of easy ways to fix and replace a broken uPVC window handle.

By identifying the kind of window you have, calculating the spindle length and purchasing a replacement handle you can quickly fix the broken window handle. It is important to be patient and ensure security when working with windows and tools however, this is a simple task. It could be the difference between having a safe and secure home, or having a window that can be easily opened. Bridgewater Glass is the place to visit if you have any questions or want to speak with an expert regarding replacing your window handle. Our team is skilled and knowledgeable to help you with any issues.