UPVC Window Handle Replacement

Replacing a broken window handle is a easy task and, with the right tools, it can be done quickly. It's important to know the type of handle you have and the spindle's size before you purchase a replacement.

Older uPVC windows feature cockspur window handles which have a spur that protrudes to secure a wedge-shaped cockspur striker plate. They can be left- or right-handed and must match when replaced.

What kind of lock or handle do I have?

There are a myriad of windows locks and handles made of upvc, each with its distinct advantages and functions. The type of handle you have will determine if your locking mechanism is efficient and if it's easy to open the windows. As time passes, and with regular use, the upvc handles on your windows can be damaged and worn out. This makes them less secure and less effective. In some cases they may even fall off completely. It is crucial to fix the handles on your window made of upvc immediately if you notice they are falling off. This will stop potential burglaries and keep your home safe.

It's a task that anyone can complete. You'll need a few basic tools, but with right knowledge, it is an easy task that will take only a couple of minutes. To get started, you will need to determine the type of lock and handle that you have on your window to help you to find the ideal replacement.

Inline Espagnolette Handles

They are the most popular kind of upvc handle and are usually placed on the outside of your window. They are flat in design and repair my Windows and doors have a latch that connects to the locking mechanism on the window frame when turned. Inline upvc handles have a spindle that goes through the center of the handle and into the frame of the window to operate the latch.

Cockspur Handles

These handles are typically located on older uPVC windows and have an distinctive hook-shaped design. Cockspur handles are held to the frame of the window with only one screw and are less secure than other types of window handle.

Handles that tilt and turn

The tilt and turn handles are different from other upvc handles because they can be turned for opening the window, and then lowered to the window to let air circulate. They have a 7mm spindle on the back and are available both in right and left-handed versions.

It is essential to know the size of the spindle when purchasing a replacement sash windows handles made of upvc. Not all are the exact same size. To determine the length of your upvc handle simply drop something in the middle of the hole, and then measure how far it extends before it reaches an obstruction. This is the maximum spindle length that will fit in your window.

What is the spindle?

uPVC window handles function similarly to doors. By turning the handle, you will be able to operate a latch within the frame. The window is then opened and shut. The handles could be damaged, especially if frequently used or exposed to harsh conditions. This can lead to the need to replace your uPVC handles for windows as they may not be able to operate the window in a proper manner anymore.

There are many different kinds of uPVC handles available including Espag, Cockspur and Spaded handle options. These handles are designed in a variety ways to fit into uPVC frames. Each handle type utilizes an individual spindle to lock the window mechanism. It is important to identify the kind of handle that is installed on your uPVC windows to ensure that you replace it with the correct one.

The base section of the handle will inform you what kind of uPVC it is. A snap-in cover is over the screw that holds the handle's base in place. Once you remove this and you'll be able to see the screw that holds the base of the handle in place. Once both screws have been removed, you should be able pull the handle from the uPVC.

After you have removed the uPVC handle, remove it from the locking mechanism. Be sure to note the length of the spindle, as you'll need to make sure that you buy one that is the same length as the original handle and locking mechanism.

The spindle wears down and becomes inoperable with the locking mechanism. This could be due to corrosion, damage due to continuous use, or even an unreliable locking mechanism. When this happens it is necessary to replace the window handle and the locking mechanism to restore full functionality to your uPVC windows.

How do I remove my old handle?

In the course of time and daily use, window handles may become damaged or broken and if this happens, it is important to Repair My Windows And Doors them as quickly as possible to ensure the safety of your home. It is simple to replace a damaged or worn handle. The task can be completed in less than one minute without the need of special tools.

To remove the old handle, first remove the screw at the base of the handle. After this screw is removed, the handle will be pulled away from the base section. A second screw is located at the bottom of the handle. This can also be removed. After these two screws are removed, the handle can be detached from the base of the window.

After removing the old handle, align the fixing holes of the new handle to the holes already present in the window frame. There may be a tiny sticker or caps on the new handle, so remove these if necessary and then screw the handle in place. It is crucial to verify that the handle works once it has been installed. Turn the handle around and make sure that the lock mechanism is activated.

Espag handles come with an extra spindle that is protruding from the handle and slot into a multipoint locking mechanism within the window frame. Cadenza windows feature a blade with cutouts that fit into the lock mechanism. Cockspur handles are long and hook over the frame of the window or the transom crossmember of the bar.

After you have installed the new handle, slide the spindle into the window lock and tighten it. Replace the snap-in cover and screw cap (if appropriate) once the handle is fixed. When the handle is ready for use, you can open and close the window a couple of times to make sure that it functions properly and securely.

How do I install the new handle?

It's not that difficult to change the handle on your windows made of uPVC. The procedure is simple. All you need is a screwdriver, and a small amount of patience. The first thing you need to do is ensure that the handle is not locked and then take out any screws that are visible. you can also replace these by screw caps if you need. After removing the handle you will need to note the length of the spindle that extends from the back. This is crucial as it will determine what kind of handle to buy.

Espagnolette handles that are made of uPVC are the most sought-after type of handle. They have a spindle that is inserted into the handle and acts as an internal locking mechanism within the window frame. The handle releases the latch and allows the window to open. As time passes and with regular use, espagnolette handles could be damaged or destroyed and it is necessary to find an alternative.

Cadenza handles are a second type of uPVC window handle, which is typically used on tilt and turn windows. They feature a protruding knife that is operated by a multi-point locking mechanism inside the window. They are more secure than an espagnolette handles since they only open from the inside. You can replace them using the same method that you would do for handles made of espagnolette however, ensure that the new handle is not angled and flat.

Once you have determined the correct handle to purchase, you can simply place the new handle to the existing screw holes, and then screw it into the appropriate position. After that, you can put the screws on and test your new handle. You can do this by moving the handle between the locked position to the unlocked one several times. It is possible to contact an expert to see how you can fix any problems. They will often be able to guide you on the best approach to solve the issue in a quick and efficient way.