Choosing uPVC Replacement Window Handles

Almost all customers agree that these upvc replacement window handles are simple to install and feel like high-quality. It's crucial to understand that the handle you select for your window should be suitable for the window.

The primary factor is the step height that refers to the gap beneath the handle's nose to the frame or base. Other considerations include lockable mechanisms and designs.

Replacement parts

There is a variety of replacement upvc window handles available for purchase. They come in many different colours and styles so there's sure to be something to suit your windows. It's easy to make impulsive purchases especially if the handle is damaged, therefore it's a good idea to look over the details prior to committing to buying a replacement. The first step is to be aware of the type of handles made from upvc you have and what the differences are between them. The table below lists the most common handles to help you select the best one to fit your upvc window.

Espag handles are the most commonly used and are found on most modern double glazed windows replacement glazed windows. They are usually attached to the frame with two screws that screw into the frame from both sides, above and below.

The spindle bar in the back could be of different sizes, uPVC Replacement Window Handles and can determine whether they are left-handed or right-handed. It is essential to know the measurements of the handle you currently have to ensure that you purchase the appropriate replacement.

Usually, they are fixed with two bolts similar to the Espag handle but they are positioned low from the frame, which means that the arm will not penetrate your blinds. This is a good option for blinds for your windows made of Upvc and want to ensure that the handle will blend with them.

Cockspur handles are similar to Espag handles but they have a nose that is closed over a wedge that rests on the frame of the window. This type of handle is commonly used on older Upvc windows as well as some wooden windows.

Tilt and turn handles are typically found on casement windows and can be operated by turning the handle or pressing on the top of the window. This lets you open the window from inside and clean it from outside without having to climb a ladder or walk across the fence. They are also a great option for those with limited mobility, and can enhance security and access to the home.

Hints and tips

Many people will need to replace their uPVC window handles at some time. If this occurs, it's a good idea to know a few tips and tricks that will help the job go as smoothly as possible.

Examine the type of handle that is at your home. Depending on the type of handle is attached to and which locking mechanism it uses it could be necessary to change the entire handle and lock. If the roller cams or shoot bolts (espags) are stuck or are seizing up, you'll have to replace them, along with the handle.

Fortunately, the majority of uPVC handles are identical and conform to industry standards for size, which makes replacing them a simple task. The first step is to remove the screw covers from the handles, usually the pozi-drive screws. Once the screw covers are removed you will be able to dismantle the handle.

It's a great idea to take note of how far the spindle extends from the base of your handle when you separate it. This will allow you to determine the length of the spindle for uPVC Replacement Window Handles a replacement handle. Simply take note of the length the square peg extends from the bottom of the handle.

This is particularly crucial for inline uPVC window handles since they are always straight and will only open either left or right, and won't operate in the middle. It's a good idea if you're not sure of the type of handle you have at your home to borrow a handle to see how it works.

You can also determine the hands of a uPVC window by observing how the handle rotates when it is in use. Handed handles can turn either clockwise or counter-clockwise. If you're unsure it's possible to have someone else open the window with the handle and figure out how it functions in this manner.

Find the spindle's measurement.

It isn't easy to select the appropriate replacement handle for your window because there aren't all handles that come in the same size. It is essential to accurately measure the spindle when installing a new handle. This will ensure that the handle fits. There are a variety of uPVC handles that operate in different ways. It is crucial to determine which one you have, as well as the locking mechanism you are using.

The spindle of the espag handle extends out from the handle's rear, and is connected to the lock gearbox within the window frame. When you turn the handle, this will turn the lock inside the gearbox, allowing you to open the window. They are used on uPVC windows with casement and can be locked using keys for extra security.

Cockspur handles are commonly found in older double-glazed uPVC window frames. They are characterized by a "nose", which closes over a wedge-shaped striker block. They are also quite simple and they can be locked using keys. It is more difficult to replace these handles because they are not as popular as the espagnolette handles.

If you have a tilt and turn uPVC window, then you'll need to get a special type of uPVC replacement handle that has an entirely different locking mechanism. The handle will tilt the window, and allow it to rotate back and forth in order to fully open it. You must choose the handle with a spindle of at least 55mm in order to be able to reach the window frame.

You can follow the same procedure to remove and replace this type of uPVC handle, however you will need to be careful when unscrewing the old one. It might be necessary to open the window a bit wider than usual to access both screws that secure it to the frame. Once you have fitted your new uPVC handle and verified that it is in the correct position, you can tighten the screws and test the lock to confirm that it is working properly.

Fit the new handle

Once you have the right replacement handle it can be screwed in the right place. It will require a screwdriver, and an electric one may be easier. It is important to not overtighten the screws while screwing them into. This could cause the knob or handle to become warped.

The second step in installing the new handle is to put in the spindle. This is the component that runs through the handle and is responsible for operating the locking mechanism within the window. It is essential that the part is fitted correctly, as this will permit the window to be opened and closed securely.

There are a variety of types of uPVC handles. There are various kinds of uPVC window handles.

Espagnolette Handles are handles inline which can be used to open tilt and turn windows.

Cranked Espagnolette Handles: These are similar to inline handles, but have a curved shape that can be useful for hard-to-reach windows.

Tilt and turn handles - They are used to operate the opening mechanisms and closing mechanisms for tilt and turn windows. They also allow for the movement of windows.

The majority of uPVC window frames are equipped with these. In the UK they are often called "Bay Windows".

It can be frustrating when your uPVC handle breaks. There is no need to replace the entire uPVC window because of a damaged window handle. There are a few basic steps you can follow to repair or replace a damaged uPVC handle.

By identifying what kind of window you have, calculating the length of the spindle, and then purchasing the replacement handle, you can quickly fix the broken window handle. When working with windows or tools it is essential to prioritize safety. However, this is a relatively simple job. It could mean the difference between a safe and secure home or a window that is easily opened. If you have any concerns or would like to speak to a specialist about replacing the handle on your window, call Bridgewater Glass. We have a team that is knowledgeable and experienced to help you with any problem.