Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they do not rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, making it extremely dangerous and possibly fatal. It is crucial to take the time to ensure that you're doing everything you can to keep your windows in good condition.

For single pane windows, it is relatively easy to replace windows, and the new one is usually able to fit into the frame of the previous one easily. However, if you have double pane windows that are secured by internal beading, it will be more difficult to remove the panes that are in place and replace them with new ones. In this case, it is necessary to buy plastic spacers to help the new pane fit into the window frame.

If you plan attempt to remove the window panes by yourself, it is essential to wear the appropriate safety equipment, including thick gloves and eye protection. It is also recommended to lay down a drop cloth before you start working on the glass so that any fragments of glass fall on the fabric instead of landing on the floor, where they could be trampled upon and Upvc Window Repairs cause further damage.

It's a great idea to seal the gap after the glass is removed. This will keep drafts and water from getting into your property until a professional comes out to fix the window. It also acts as a barrier to prevent any criminals from getting into your home. If the gap between the door and the window is large, you might want to use security screens that has windows. This will give you the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows made of sash. As time passes, they may develop a number of problems, including sagging. A sagging window can cause problems with light, draughts and even security. It's important to take action as soon as you notice your uPVC windows are sliding.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll have to open the window to access the frame. With a screwdriver, you can take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have relocated your hinges. If you're satisfied with the fit, tighten the screws to ensure they remain in the right place.

If you can't reposition the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to lose their tightness. It is essential to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles could also loosen. Often it is due to screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need to shut the window and do a test fitting. The corner joints of the sash need to be aligned with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle and turn the mechanism back into its original position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it's important to take action. Windows that leak water do are not just a cause for repairmywindowsanddoors destruction of your home's structure but also undermine your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on how serious the issue is, the old caulking may have to be removed. It is essential to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area harder to clean and reduce your energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more serious cases you might have to consider replacing the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to keep in mind that if the leakage is coming from between the glass of your double-glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open, or if it opens with a breeze. Anyone with the skills to fix them can replace hinges in just a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. It's very simple to replace a hinge on a window but it's much simpler if you have someone to help you hold the frame.

Make sure that the uPVC hinges are closed and open in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused either by opening the window incorrectly or due to a poor installation in the factory. Sending us a photo via our website is often enough to solve the issue. We are always happy to provide suggestions.

It is also crucial to ensure that the hinges are lubricated regularly. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window repairs near me easier to open and close. It can also lower the possibility of a window sticking and prevent corrosion. Ideally, you should perform this every year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different things. First, the hinges due to wear and tear could become misaligned. This will cause a gap to form where the sash joins the frame. If they're beyond repair, it could be necessary to have them realigned. The interlock may also become misaligned. It is located on the hinge's side, and may need to be cleaned. In some instances it is possible to replace these.

These seals are susceptible to wear and tear or get damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glasses. This will help to regulate indoor temperatures, and reduce the risk of draughts.

Another method of reducing draughts effectively is by using a Draught-exclusion device. These are usually fabric tubes filled with a filler which can be put on top of your window sill. These will keep your home warm by blocking cold air.

Your upvc windows can remain a great source of insulation and security for your home with a little regular maintenance and repairs. However, it is important to recognise that all windows have a life span and they may reach an point at which it is more efficient to replace them than fix them. If you have any problems with your upvc window you should consult an expert as soon as you can.