Choosing uPVC Replacement Window Handles

Almost all customers agree that the windows replacement (Suggested Online site) handles made of upvc are easy to install and feel like good quality. But it's important to understand that the kind of handle you select must be right for your window.

The key factor is the step height which refers to the gap beneath the nose of the handle to the base or frame. Other considerations include lockable designs and mechanisms.

Replacement parts

You can buy a variety of replacement handles made of upvc. There are a variety of designs and colors to pick from, windows replacement so you're sure to find one that will match your existing windows. It's easy for you to make an impulse purchase, especially when the handle breaks. Therefore, it is best to check a few things before buying a replacement. First, you must know what type of handles made from upvc you have and what the differences are between them. The table below lists the most common handles so that you can find the right one to match your window.

Espag handles are the most common and are used on the majority of modern double glazed window replacement glazed windows. They are typically attached to the frame with two screws that screw in from above and below.

They have a spindle bar on the back which can be a variety of sizes. This will determine how they work (either left or right handed). This is the reason it's crucial to take a measurement of the handle you have in order to make sure that you're ordering the correct replacement.

Usually, they are fixed with two bolts similar to the Espag handle, they have a low projection from the frame which means that the arm won't poke through your blinds. This is a great option if you have blinds on your upvc windows and want to ensure that the handle will blend in with them.

Cockspur handles look similar to Espag handles, however they have a nose that closes over a wedge that rests on the frame of the window. This type of handle is typically used on older Upvc windows as well as on some wooden windows.

Tilt and turn handles are usually found on casement windows and can be operated either by turning the handle or pressing on the top of the window. This opens the window from the inside, allowing you to clean from outside without having to climb to the ladder or walk over the fence. These are ideal for those with limited mobility, and can improve security and access in the home.

Hints and tips

A lot of people will need to replace their uPVC window handles at some time. It's important to have some tips and tricks that will help you make the task easier.

The first thing you should do is to determine what kind of handle you have at home. Depending on what the handle is attached to and which locking mechanism it is using, it may be necessary to replace the entire handle and lock. For instance, if the shoot bolts (espag) and roller cams are seizing or jammed the handle, you'll need to replace them as well as the handle itself.

Thankfully, the majority uPVC handles adhere to industry standards and are very alike. This makes replacing them an easy process. The first step is to remove the screws from the handles, which are typically the pozi-drive screws. Once the screws are removed then you'll be able to dismantle the handle.

When you have the handle broken it is an ideal idea to take note of how much of the spindle protrudes from the base of the handle. This will enable you to determine the length of the spindle for an alternative handle. To do this, measure the amount of the square peg sticking out from the bottom of the handle and use this as a guide.

This is particularly important for inline uPVC window handles because they are always straight and open either left or right, and won't operate in the middle. It is a good idea if you're not certain of the kind of handle you have at your home, to borrow a handle to see how it functions.

Another great tip for working out what the hand of the uPVC window handle is to simply look at how the handle turns when operating. Handed handles can turn either clockwise or counter-clockwise. If you're unsure, you can always have someone else open the window using the handle, and work out how it operates in this way.

Take a measurement of the spindle

It can be difficult to choose the appropriate replacement handle for your window as not all handles have the same size. It is important to accurately measure the spindle when fitting the new handle. This will ensure that the handle fits. There are many different kinds of uPVC window handles and they operate in different ways so it is essential to know the type of handle you have and the type of locking system that you are using.

Espag handles come with a spindle that extends from the rear of the handle, and is inserted into the lock gearbox within the window frame. When you turn the handle, this turns the lock within the gearbox, and opens the window. They are typically used on uPVC windows with casement and can be locked using keys to provide additional security.

Cockspur handles are usually found in older double glazed windows replacement-glazed uPVC window frames. They have an "nose", which is secured by a wedge-shaped striker block. They are also quite simple and they can be locked using keys. It is more difficult to replace these handles since they aren't as common as the espagnolette handles.

If you have an open tilt and turn uPVC window, then you'll require a particular type of uPVC replacement handle that comes with an additional locking mechanism. This will be able to open the window, windows Replacement but also turn it around to fully open it. You must choose the handle with a spindle that is at least 55mm in order to be able to reach the window frame.

The same procedure can be used to remove and replace the uPVC handle. However, you will need to take care when unscrewing it. It is possible to open the window more than usual to reach both screws that attach it to the frame. Once you have fitted your new uPVC handle and checked that it is in the right position, then you can tighten the screw covers and test the lock to make sure it works correctly.

Fit the new handle

When you have the proper replacement handle it is easy to screw in the right place. It will require a screwdriver, and an electric one might be easier. When screwing, it is crucial not to over tighten the screws as this could cause the handle to break or warp.

Inserting the spindle is the next crucial step to install the new handle. This is the part that is inserted into the handle and operates the locking mechanism inside the window. It is essential that the part is fitted correctly to allow the window to be opened and closed securely.

There are a variety of different kinds of uPVC window handles. They include:

Espagnolette Handles - these are inline handles that can be used to windows that tilt and turn to open the window.

Cranked Espagnolette Handles - these are similar to the inline handle however they have a curvaceous design that is ideal for windows that are difficult to reach.

Tilt and Turn Handles these are used on tilt and turn windows to operate the opening and closing mechanisms.

The majority of uPVC window frames come with these. They are often called 'Bay Windows' in the UK.

If your uPVC window handle is broken it can be a major hassle. However, there is no need to replace the entire uPVC window because of a broken handle. There are many simple steps you can take to fix and replace a broken uPVC window handle.

By identifying what kind of window you have, calculating the spindle length and purchasing an appropriate handle, you can quickly fix the broken window handle. It is crucial to be patient and ensure security when working with windows and tools, but this is a relatively simple task. It can mean the difference between having a secure and secure home or a window that can be easily opened. If you have any questions or would like to speak to a professional about replacing your window handle, contact Bridgewater Glass. We have a team that is experienced and knowledgeable to assist you with any issue.