Choosing uPVC Replacement Window handle Window Handles

Nearly all customers agree that these windows handles made of upvc are easy to install and feel like high-quality. However, it is important to realize that the kind of handle you select should be appropriate for your window.

The primary factor is the step height which is the distance from the nose of the handle to the base or frame. Other considerations include lockable mechanisms and styles.

Replacement parts

You can purchase a variety of replacement handles made of upvc. There are numerous styles and colours to choose from, so you're bound to find something that matches your windows. It's easy for you to purchase a product on impulse especially when the handle breaks. It is therefore advisable to do some research before purchasing a replacement. The first thing to think about is what type of upvc handle you have now and what the difference between the kinds is. The table below lists the most common handles so that you can find the right one to match your window.

The majority of double-glazed windows today come with handles for epag. They are typically attached to the frame using two screws that screw into the frame from both sides.

They have a spindle bar on the back, which can be of a variety sizes, and this will determine the way they operate (either left or right handed). It's important to take the measurements of the handle you have to ensure that you purchase the correct replacement.

Usually, they are fixed with two bolts, similar to the Espag handle but they have a lower projection from the frame which means that the arm won't poke through your blinds. This is a great choice when you want the handle to blend with your blinds and upvc windows.

Cockspur handles are similar to Espag handles, however they have a nose which closes over a wedge that rests on the frame of the window. This type of handle is commonly used on older Upvc windows as well as some wooden windows.

On casement windows, tilt and turn handles can be operated by either turning the handle or pressing the top of window. This lets you open the window from inside and clean it from outside without the need to climb a ladder or step across the fence. They're also an excellent option for those with limited mobility, and can enhance security and access to the home.

Tips and tricks

Many people will have to replace their uPVC window handles at some moment. It is essential to know some tips and tricks that can aid in the process.

The first thing to do is to determine what kind of handle you have at home. Depending on the type of handle is attached to and which locking mechanism it utilizes, it may be necessary to replace the entire handle and lock. For instance, if the shoot bolts (espag) and roller cams are seizing or jammed and sizing, you'll have to change them as well as the handle itself.

Fortunately, the majority of uPVC handles are similar and adhere to industry standard sizing, which makes replacing them a easy process. The first step is to remove the screw covers from the handles. These are usually the pozi-drive screws. Once these are removed, you can then remove the handle.

It's a great idea to keep track of how much the spindle protrudes from the base of your handle when you remove it. This will enable you to measure the spindle length for a replacement handle. Simply take note of the length the square peg extends out of the bottom of handle.

This is particularly crucial for inline uPVC window handles since they are always straight and open either left or right, and will not operate in the middle. It's a good idea if you're not sure of the type of handle you have in your home to borrow a handle and see how it works.

You can also determine the handedness of a uPVC window by observing the way the handle turns when it is in use. Handles can be turned clockwise or counter-clockwise. If you're unsure then you can always have someone else open the window with the handle, and work out how it works in this manner.

Take a measurement of the spindle

Choosing the correct replacement handle for your windows could be a challenge as different handles are not the same size. The spindle is what operates the locking mechanism inside the window. It is essential that when fitting a new handle, you measure the spindle length accurately to ensure that it will fit. There are a variety of uPVC handles that operate in different ways. It is important to identify the type you have, as well as the locking mechanism you have.

The spindle of the handle extends out from the handle's rear and is connected to the lock gearbox within the window frame. When you turn the handle, this then turns the lock in the gearbox and opens the window. They are typically used on uPVC windows with casement. They can be locked using keys to increase security.

Cockspur handles are commonly found in older double-glazed uPVC window frames. They are characterized by a "nose", which is secured by a wedge-shaped striker block. They are also relatively easy to install and can be locked with keys. These handles are slightly more difficult to locate replacements for as they aren't as well-known as the espagnolette handle.

If you have an open tilt and turn uPVC window, you'll require a particular type of uPVC replacement handle that has a different locking mechanism. It can open the window by tilting it, but also turn it back and forth to open it fully. You should select an opening handle that has a spindle that is at least 55mm to be able reach the window frame.

The same method can be used to remove and replace the uPVC handle. But, you'll need to be cautious when unscrewing it. It is possible to open the window a little wider than usual to ensure you access both screws that attach it to the frame. After you have installed your new uPVC handle and checked that it is in the right position, then you can tighten the screws and test the lock to confirm that it works correctly.

Install the new handle

Once you have the correct handle replacement glass for windows, replacement window handle it's going to simply screw into the correct position. It will require a screwdriver and an electric one might be a lot easier. It is essential not to overtighten the screws while screwing them in. This could cause the knob or handle to become warped.

The second step in installing the new handle is to insert the spindle. The spindle is the part that runs through the handle to operate the locking mechanism inside the window. It is vital that it is installed correctly since this will ensure the window is able to be shut and opened securely.

There are a variety of types of uPVC handles. There are a variety of uPVC window handles.

Espagnolette Handles are inline handles that can be used to open tilt and turn windows.

Cranked Espagnolette Handles: These are like inline handles but have a curved design which is ideal for hard-to reach windows.

Tilt and turn handles They are used to operate the opening mechanisms and closing mechanisms when tilting and turn windows. They also allow for the movement of windows.

These are the most common and the majority of uPVC windows have them in the first place. In the UK they are often called "Bay Windows".

If your uPVC window handle is broken it can be a major hassle. There isn't any need to replace the entire uPVC windows because of a damaged handle. There are a number of easy steps that can be taken to repair and replace a broken uPVC window handle.

You can repair your broken window handle fast by identifying the type and measuring the spindle. When working with windows and tools, it is important to prioritize safety. However, this is a relatively simple task. It could mean the difference between having a secure and secure home or a window that is easily opened. Bridgewater Glass is the place to go if you're in need of help or need to speak with a specialist regarding replacing your window handle. We have a team of experienced and knowledgeable professionals who are able to assist with any issues you may be facing.